• Home
• Contact

DELTAPLAST PE

Deltacolor has developed a specific range of EVA-based masterbatches forthe coloration of HFFR compounds on the cable industry. This masterbatch range includes a special pigment selection which guarantee an optimal dilution and coloration of the HFFR

This masterbatch range includes a special pigments selection which guarantees an optimal dilution and coloration of the HFFR compounds, which usually have a high percentage of flame retardant filler.

The same range also exists on PE base.

Technical Characteristics

• Colour: matched to RAL 840HR with a typical flame retardant compound chosen as base. The maximum deviation from our internal Deltacolor standard is ΔE 1.5. Deltacolor can develop any special colour by customer request, the minimum order being 25 kg.
• Dose: typically from 1.0% to 3.0%, depending on the HFFR base used.
• Heat resistance: all the pigments used in the production of Deltacolor masterbatches have been selected to be process-temperature resistant. This parameter is shown on the technical data sheet for every masterbatch.
• Volumetric Resistivity: all DELTAPLAST-EV masterbatches for the cable industry have been developed to minimise the change on the dielectric properties of the HFFR compound. This value is higher than 10E+113 ohm/cm, when 1% masterbatch is dosed into a 13 ohm/cm HFFR base compound.